![Open Access](https://mechanical.journalspub.info/lib/pkp/templates/images/icons/fulltext_open_medium.gif)
![Restricted Access](https://mechanical.journalspub.info/lib/pkp/templates/images/icons/fulltext_restricted_medium.gif)
Optimization of Machining Parameters in Electrical Discharge Machining Process of Ti-6Al-4V Alloy by Taguchi Method
Abstract
References
T. Sultan, A. Kumar, R.D. Gupta. Material removal rate, electrode wear rate and surface roughness evaluation in die sinking EDM with hollow tool through response surface methodology, Int J Manuf Eng. 2014; 2-3: 14p.
M.K. Pradhan, C.K. Biswas. Modelling & analysis of process parameters on SR in EDM of AISI D2 tool steel by RSM approach, Int J MPES. 2–6p.
M. Priyadarshini, K. Pal. Grey-Taguchi based optimization of EDM process for titanium alloy, J Mater Process Charact. 2015; 2-3: 10p.
M.M. Rahman, Md.A.R. Khan. Optimization of machining parameters on tool wear rate of Ti-6Al-4V through EDM using copper tungsten electrode, J Adv Mater Res. 2010; 2-3: 7–8p.
A.A. Khan. Electrode wear and material removal rate during EDM of aluminium and mild steel using copper and brass electrodes, Int J Adv Manuf Technol. 2007; 2-3: 5–6p.
K.D. Chattopadhyay, S. Verma. Development of empirical model for different process parameters during rotary electrical discharge machining of copper–steel (EN-8) system, J Mater Process Technol. 2009; 3-4: 11p.
B.A. Patel, D.S. Patel, H.A. Patel. Influence of electrode material and process parameters on surface quality and MRR in EDM of AISI H13 using ANN, Int J Recent Innov Trends Comput Commun. 2013; 3: 11p.
I. Gupta, G. Tyagi, S. Sharma, G.K. Singh, R. Kumar. Some investigations into electrical discharge drilling of Ti-alloy using Taguchi method, Int J Electro Mech Mech Behav. 2017.
DOI: https://doi.org/10.37628/ijpe.v3i2.461
Refbacks
- There are currently no refbacks.