Open Access
Subscription or Fee Access
A Broad Review on the Impact of spring back/spring go During Bending Operation
Abstract
Abstract
Spring back is the most important element impacting the perfection of sheet metal components because of the spring back properties of sheet metal, designing forming dies is particularly complex. This is a critical issue since spring back is a common forming issue with metal forming process using high-strength steel sheets. Once a stress is released, the material's elastic recovery forces the metal to spring back into shape. There are several approach and method have been developed to forecast and mitigate the spring back in stamping such as Finite element analysis. It's difficult to come up with analytical methods concerning spring back of shaped sheet metal. It is suggested that input variables and tool design provide for a significant dimension of both the spring back, as well as a large number of major flaws in metal forming processes. Spring back is affected by a variety of parameters, namely properties of materials and production conditions. Estimating spring-back is critical for getting the right size and shape. Wrinkling and spring back tearing can all be eliminated by looking at these features, and a high-quality product can be achieved.
Keywords
References
Phanitwong, W., Sontamino, A., and Thipprakmas, S., Effects of Part Geometry on Spring-back/Spring-go Feature in U-Bending Process, Key Engineering Materials, Vol.549, pp. 100-107, 2013.
Jaydeep R Shah, S. K. Sharma, B. C. Patel, Investigating Spring back effect in U-Die bending process by varying different parameters, Material Science, Corpus ID: 123744610, 2011.
F. Vollertsen, H. Schulze Niehoff, H. Wielage, Z. Hu investigated Sheet metal Micro forming, 6th international conference on Industrial Tool, ICIT & MPT, 2007.
Bakhshi-Jooybari M, Rahmani B, Daeezadeh V, Gorji A. The study of springback ofCK67 steel sheet in V-die and U-die bending processes. J Mater Des 200930:2410–9.
M. W. Fu & W. L. Chan, A review on the state-of-the-art micro forming technologies, | Int J Adv Manuf Technol (2013) 67:2411–2437, DOI10.1007/s00170-012-4661-7.
Zhang Dongjuan, Cui Zhenshan, Ruan Xueyu, Li Yuqiang, an analytical model for predicting spring back and side wall curl of sheet after U-bending, Computational Materials Science 38 (2007)707–715.
W. Yang, M. Zhang, G. Zhao, J. Congleton, A comparison OF u-BEND AND slow strain rate procedures for assessing the SCC resistance OF type 304 stainless steel in high- temperature water, CORROSION -Vol. 47, No. 4.
A.B. Abdullah, S.M. Sapuan, Z. Samad, N.A. Aziz, A Comprehensive Review of Experimental Approaches Used in the Measurement of Spring-back, Advances in Natural and Applied Sciences, 6(2): 195-205, 2012 ISSN1995-0772.
Y.H. Moon, S.S. Kang, J.R. Cho, T.G. Kim, Effect of tool temperature on the reduction of the springback of aluminium sheets, Journal of Materials Processing Technology 132 (2003) 365–368.
Xuechun Li, Yuying Yang, Yongzhi Wang, Jun Bao, Shunping Li, Effect of the material-hardening mode on the springback simulation accuracy of V-free bending, Journal of Materials Processing Technology 123 (2002)209–211.
Zafer Tekiner, An experimental study on the examination of springback of sheet metals with several thicknesses and properties in bending dies, | Journal of Materials Processing Technology 145 (2004)109–117.
Joonhang Lee, Kwangmin Lee, Dongok Kim, Hongseok Choi and Byungmin Kim, Spring- back and Spring-go behaviours in bending of thick plates of high strength steel elevated temperature. Computational material science, 2014.
S.B. Chikalthankar, S.G. Naikwade & V.M. Nandedkar investigated as Factors affecting on Residual Stresses & Spring back in sheet metal bending: A Review, IJSRD, Vol. 3,2015.
Yuung Ming Huang, Finite element analysis on the V-die coining bend process of steel metal. Int adv. Manuf Technol (2007)34:287-294.
J.R. Cho, S.J. Moon, Y.H. Moon, S.S. Kang- Finite element investigation on spring-back characteristics in sheet metal U-bending process, Journal of Materials Processing Technology 141 (2003)109–116.
Mustafa ÖZDEMİR, Mathematical Modelling of the Effect of Different Parameters on Spring Back in Sheet Metal Formability Process. (AJER)Volume-6, Issue-10, pp-198-205, 2017.
Mustafa Özdemir, Hakan Dilipak, Bülent Bostan, Experimental Investigation of Deformation and Spring‑Back and Spring‑Go Amounts of 1.5415 (16MO3) Sheet Material, ASM International 2020.
Radha Krishna Lal, Vikas Kumar Choubey, J. P. Dwivedi & Shravan Kumar - Study of factors affecting Springback in Sheet Metal Forming and Deep Drawing Process, Materials Today: Proceedings 5 (2018) 4353–4358,2017
Kartik T and Rajesh R- Effect of Punch Radius and Sheet Thickness on Spring-back in V-die Bending, OAJ. 2017 June 11(8): pages 178-183
Ehsan Etemadi, Abbas Naseri and Mohsen Valinezhad, Novel U-bending designed set up for investigating the spring-back/spring-go of two-layers aluminium /copper sheets through experimental tests and finite element simulations. J Materials: Design and Applications 0(0) 1–12.
DOI: https://doi.org/10.37628/ijmmp.v8i1.1414
Refbacks
- There are currently no refbacks.