Optimization of Drilling Process Parameters for Thrust Force: A Review

Yogendar Singh Chouhan, M. A. Saloda, S. Jindal, Chitranjan Agarwal

Abstract


The big challenge of the industries is concentrated for achieving less wear and thrust force on the drilling tool and more tool life. In this paper an effort is made to review the literature work on investigating the effect of drilling and tool parameters on thrust force in drilling process on lathe machine with different-2 work piece materials, for optimization of thrust force. Most of experiments have been carried out by considering various independent parameters namely spindle speed, drill bit diameter and feed rate. Finally most significant variable is found out among different input parameter for affecting thrust force by using various mathematical and statistical techniques.

Keywords: Drilling, spindle speed, feed rate, thrust force

Full Text:

PDF

References


Ahmed, N., (2014). Effect of changing drilling parameters on thrust force and torque. Middle- East Journal of Scientific Research. 21(2): 347-352.

Alam, K., Mitrofanov, A.V. and Silberschmidt, V.V., (2010). Experimental investigations of

forces and torque in conventional and ultrasonically-assisted drilling of cortical bone.

Medical Engineering and Physics. 33 (2): 234-239.

Audy, J., (2007). Optimisation of drill point geometries through computer assisted modelling and

experimental thrust, torque and power in drilling. Edith Cowan University.

Badan, I., Oancea, Gh., Vasiloni M., (2012). Mathematical model for drilling cutting forces of

crmnmos8-6 steel. Bulletin of the Transilvania University of Brasov. 54 (5) 1 – 2012.

Bakkal, M., Shih, J.A., Mcspadden B. S. and Scattergood, O. R. (2005). Thrust force, torque, and

tool wear in drilling the bulk metallic glass. International Journal of Machine Tools &

Manufacture. 45 (1) 863-872.

Baroiu, N., Croitoru, C., Berbinschi, S., Teodor, V., and Totolici, S. (2012). Cutting Force and

Torque at Drilling with Curved Cutting Edge Multi-Flute Drill. Recent Advances in Industrial and Manufacturing Technologies.46-51

Cicek, A., Kivak, T., Samtas, G., and Cay, Y. (2012). Modelling of thrust forces in drilling of

AISI 316 stainless steel using artificial neural network and multiple regression analysis. Journal of Mechanical Engineering. 58 : 492-498.

Das, G. and Das, P. (2015). Cutting forces in drilling operation: measurement and modeling for

medium-scale manufacturing firms. International Journal of Computer Applications.121 (8): 0975 – 8887.

Guibert, N., Paris., H., Rech, J. and Claudin, C.(2009). Identification of thrust force models for

vibratory drilling. International Journal of Machine Tools & Manufacture.49: 730–738.

Iliescu, D., Gehin, D., Gutierrez, E. M., and Girot, F., (2009). Modeling and tool wear in drilling of CFRP. International Journal of Machine Tools & Manufacture. 50: 204-213.

Iliescu, S. and Vlase, A. (2008). New mathematical models of Axial Cutting Force and Torque

in Drilling 20MoCr130 Stainless Steel. WSEAS International Conference. 210-215.

Kaplan, Y., Okay, S., Motorcu, R. A. and Nalbant, M. (2014). Investigation of the effects of

machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work steel. Indian journal of engineering & material sciences.21 : 128-138.

Kuram, E., Ozcelik, B., Demirbas, E. and Sık, E. (2010). Effects of the cutting fluid types and

cutting parameters on surface roughness and thrust force. World Congress on Engineering.

Kyratsis, p. (2011). Thrust force prediction of twist drill tools using a 3D CAD system

application programming interface. Int. J. Machining and Machinability of Materials.10:18-33.

Kumar, K. P., Kishore, K., Laxminarayana, P., (2013). Prediction of thrust force and torque in drilling on aluminum 6061-T6 alloy. International Journal of Engineering Research & Technology (IJERT) 2(3): 2278-0181.

Lia, R., Hegdeb, P., and Shih, J., A., (2006). High-throughput drilling of titanium alloys. International Journal of Machine Tools & Manufacture. 47: 63-74.

Madhavan, S. and Prabu, B.S. (2012). Experimental investigation and analysis of thrust force in

drilling of carbon fibre reinforced plastic composites using response surface methodology. International Journal of Modern Engineering Research.2 : 2719-2723.

Matsumura, T. and Tamura, S. (2013). Cutting force model in drilling of multi-layered materials.

CIRP Conference on Modeling of Machining Operations.8 : 182-187.

Muniaraj, A., Das, L. S. and Palanikumar, K. (2013). Evaluation of thrust force and surface

roughness in drilling of al/sic/gr hybrid metal matrix composite. International Journal of Latest Research in Science and Technology.2 : 4-8.

Miller, F. S., Tao, J. and Shih, J. A. (2006). Friction drilling of cast metals. International Journal

of Machine Tools & Manufacture. 46: 1526–1535.

Nagaraja, Herbert, A. M., Shetty, D., Shetty, R. and Shivamurthy, B.(2013). Effect of process

parameters on delamination, thrust force and torque in drilling of carbon fiber epoxy composite. Research Journal of Recent Sciences. 2(8) : 47-51.

Rajamurugan, V. T., Shanmugam, K. and Palanikumar, K. (2013).Mathematical model for

predicting thrust force in drilling of GFRP composites by multifaceted drill. Indian Journal of Science and Technology. 6 (10) : 5316 – 5324.

Reddy, S. A., kumar, V.G. and Thirupathaiah, C. (2013). Influence of the cutting parameters on

the hole diameter accuracy and the thrust force in drilling of aluminium alloys. International Journal of Innovative Research in Science,Engineering and Technology. 11(2): 6442-6450.

Singh, S. V. R., Latha, B. and Senthilkumar, S. V. (2009). Modeling and analysis of thrust force

and torque in drilling gfrp composites by multi-facet drill using fuzzy logic. International Journal of Recent Trends in Engineering.5 (1) : 66 – 70.

Szwajka, K. (2011). Torque and thrust force in drilling. Annals of Warsaw University of Life

Sciences. 76 : 108-115.

Tsao, C. C., and Hoccheg, H., (2007). Effects of tool wear on delamination in drilling composite materials. International Journal of Mechanical Sciences. 49: 983-988.

Vaishak, N., L, Ramakrishna, Devananda, Jaimon, D., Quadros, Rakshith, Shetty, and Balakrishna, S., S., (2014). Analysis of thrust force and torque in drilling granite particulate reinforced epoxy composites by using multi facet HSS twist drill. Proceedings of 8th International Conference on Engineering and Technology Research, Novotel World Trade Centre, Dubai, UAE, ISBN: 91-922069-49-8.

Vankanti, K. V. and Ganta, V. (2014). Optimization of process parameters in drilling of GFRP

composite using Taguchi method. Journal of Materials Research and Technology. 3(1) : 35-41.

Vinnikov, I., frenkel, M., (1960). Drilling practice. mosco : peace publication. 91.

Zitoune, R., Krishnaraj, V. and Collombet, F. (2010). Study of drilling of composite material and

aluminium stack. Journal of mechanical science direct.92 : 1246–1255.


Refbacks

  • There are currently no refbacks.