OCCUPATIONAL HEALTH AND SAFETY ISSUES IN THE MANUFACTURING INDUSTRY: EVIDENCE FROM BANGLADESH
Abstract
In industries like manufacturing and construction, safety is the most crucial concern. Recently, the
growing quantity of accident cases reported involving the workplace environment indicates the
significance of safety issues in manufacturing sectors. This study was conducted to determine the
relationship between safety practices and injury management among workers in the manufacturing
industry. Five hundred fifty participants were involved in this research study. The outcome of this
study indicated that 90% of the participants were aware of the existence of major and minor hazards
related to their work and 69% of workers have good knowledge about different safety signs. In this
descriptive study, the comprehension check was once carried out with the useful resource of a
widespread questionnaire got from ISO 9186-1:2007. The findings of this study indicate that the
productivity of the organization was mostly affected by safety and health control programs. Based on
the findings of this study, the researcher recommended some significant improvements to the
managerial body of the factory to design an ergonomic workplace and practice a good manner in each
occupational safety and health hazard control program to increase productivity. This study found that
safety practice in Jibon Plastic Industry Limited was good.
Keywords
Full Text:
PDFReferences
Angel Phumzile Machabe, Vartikka Indermun: An overview of the occupational health and
safety act: a theoretical and practical global perspective. Arab. J. Bus. Manag. Rev. (OMAN
Chapter). 2013, Vol. 03, No.05.
Waqas Ahmed Khan, Talha Mustaq and Anmol Tabassum: Occupational health, safety and
risk analysis. Int. J. Sci. Environ. Technol. 2014, Vol. 03, No.04, pp.1336 – 1346.
Zohreh Molamohamadi and Napsiah Ismail: The Relationship between Occupational Safety,
Health, and Environment, and Sustainable Development: A Review and Critique. Int. J.
Innov. Technol. Manag. 2014, Vol. 05, 03.
Kallol Kumar Samaddar: Occupational Health And Safety Management In RMG Sector Of
Bangladesh. Int. J. Sci. Technol. Res. 2016, Vol. 05, No. 12.
Josephine Moeti-Lysson and Rudolph L. Boy: A study of health and safety practices in small
and medium sized enterprises: -A case of Botswana. J. Econ. Bus. Manag. 2011, Vol. 02 (3).
pp. 125-131.
P. Katsuro, C. T. Gadzirayi, Taruwona M and Suzanna Mupararano: Impact of occupational
health and safety on worker productivity: A case of Zimbabwe food industry. Afr. J. Bus.
Manag. 2010, Vol. 04(13), pp. 2644-2651.
Grace Katunge Jonathan and Rosemary Wahu Mbogo: Maintaining Health and Safety at
Workplace: Employee and Employer’s Role in Ensuring a Safe Working Environment. J.
Educ. Pract. 2016, Vol. 07, No.29.
Ms. Lincy Joykutty: Study on effectiveness of Safety & health program on workforce of
various manufacturing sectors, Bangalore. Glob. J. Manag. Bus. Stud. 2017, Vol. 07, No. 01,
pp. 1-13.
Fabian Alberto Suarez Sanchez, Gloria Isabel Carvajal Pelaez and Joaquín Catala Alis:
Occupational safety and health in construction: a review of applications and trends. Ind.
Health. 2017, No. 55, 210–218.
Jaeho Shin, Yeongjun Kim, and Changhee Kim: The Perception of Occupational Safety and
Health (OSH) Regulation and Innovation Efficiency in the Construction Industry: Evidence
from South Korea. Int. J. Environ. Res. Public Health. 2021, 18, 2334.
Abera Ayalew, Yeshmebet Demissie: The Effect Of Occupational Health And Safety
Program On Organizational Productivity: In Case Of Bahirdar Tannery Factory. Int. J. Sci.
Res. 2020, Vol. 10, No. 02.
Muhammad Ajmal, Ahmad Shahrul Nizam Isha, ShahrinaMd Nordin and Al-Baraa
Abdulrahman Al-Mekhlafi: Safety-Management Practices and the Occurrence of
Occupational Accidents: Assessing the Mediating Role of Safety Compliance. Sustainability.
, 14, 4569.
Nse A Odunaiya, Dolapo D Owonuwa, Oluwafemi O Oguntibeju: Ergonomic suitability of
educational furniture and possible health implications in a university setting. Adv. Med. Educ.
Pract. 2014, 05, 1–14.
Hamed Taherdoost: Determining Sample Size; How to Calculate Survey Sample Size. Int. J.
Econ. Manag. Syst. 2017, Vol. 02.
Simarjeet Kaur: sample size determination (For Descriptive Studies). Int. J. Curr. Res. 2017,
Vol. 09, No. 03, pp.48365-48367.
T S Nanjundeswaraswamy and Shilpa Divakar: Determination of sample size and sampling
methods in applied research. Proc. Eng. Sci. 2021, Vol. 03, No. 01, pp. 25-32.
E. Cagno, A. Di Giulio And P. Trucco: Risk and causes-of-risk assessment for an effective
industrial safety management. Int. J. Reliab. Qual. Saf. Eng. 2000, 07, 113-128.
Dr.S.Kavitha, A.Kandeepan and N.Narmadha: ABC Analysis, an Inventory Management
Technique at a Manufacturing Company. Int. J. Oper. Manag. Serv. 2016, Vol. 19, No. 03,
pp. 167-170.
Erkan Kiyak, Oğuz Han Timus and Mehmet Karayel: Inventory classification with ABC
analysis. J. Nav. Sci. Eng. 2015, Vol.11, No. 02, pp.11-24.
Edewor Ogheneofejiro Jesujoba and Adeniji Anthonia Adenike: ABC analysis and product
quality of manufacturing firms in Nigeria. J. Manag. Inf. Decis. Sci. 2021, Vol. 24, No. 01.
Shamani Jayakumaran, Wong Zi Shan, and Dazmin Daud: ABC Analysis: A Qualitative Case
Study on Inventory Management in Giant Superstore Taman Connaught, An Outlet of GCH
Retail (Malaysia) SDN. BHD. IOP Conf. Series: Materials Science and Engineering. 2020.
Mathilda Sri Lestari, Tri Wibowo and Ainur Komariah: Ergonomic Aspect Analysis of
Classroom’s Table and Chairs Design for Vocational High School. International Conference
on Applied Science and Engineering. 2018, Vol 175.
Nasr Al-Hinai, Mahmood Al-Kindi and Ahm Shamsuzzoha: An Ergonomic Student Chair
Design and Engineering for Classroom Environment. Int. J. Mech. Eng. Robot. Res. 2018,
Vol. 07, No. 05.
R. W. Mcgorry and J.-H. Lin: Power grip strength as a function of tool handle orientation and
location. Ergonomics, 2007. 50:9, 1392 – 1403.
Gregor Harih and Bojan Dolak: Tool-handle design based on a digital human hand model. Int.
J. Ind. Ergon. 2013, 43, 288-295.
Chandra Arunesh and Chandna Pankaj: Ergonomic design of hand tool (screwdriver) for
Indian worker using comfort predictors: a case study. Int. J. Adv. Eng. Technol. 2011, Vol.02,
No. 04, pp.231-238.
Maxwell Asumeng, LebbaeusAsamani, Joana Afful and Collins Badu Agyemang:
Occupational safety and health issues in ghana: strategies for improving employee safety and
health at workplace. Int. J. Bus. Manag. Rev. 2015, Vol. 03, No. 09, pp.60-79.
Bagmita Bhagawati: Basics of Occupational Safety and Health. IOSR J. Environ. Sci.,
Toxicol. Food Technol. 2015, Vol. 09, No. 08, pp.91-94.
DOI: https://doi.org/10.37628/ijied.v8i1.1411
Refbacks
- There are currently no refbacks.