|
Issue |
Title |
|
Vol 3, No 2 (2017) |
Generation of Electricity with the Help of Speed Brakes |
Abstract
|
Aman Aggarwal, Amit Kumar |
|
Vol 8, No 2 (2022) |
Generative Design and Simulation for Castor Wheel Assembly |
Abstract
|
Lokesh Maddiboyina |
|
Vol 5, No 2 (2019) |
Hardened Steel an Appliance with Low Degeneration |
Abstract
|
Bangshidhar Goswami, Sipra Suman, Atul Kumar, Abhishek Kumar, Bijoy Kumar Singh, Diwakar Suman, Amit Sinha, Tridib Kumar Pathak |
|
Vol 3, No 1 (2017) |
Identification of Axial Air-Foil Bearings and Radial Air-Foil Bearings |
Abstract
|
Deepak Singh |
|
Vol 8, No 2 (2022) |
LATTICE-BASED CELLULAR STRUCTURE DESIGN STRATEGY |
Abstract
|
Amit Bhumarker, Abhishek Singh |
|
Vol 2, No 2 (2016) |
Manufacturing of a Portable and Low Cost Fused Deposition Modelling Principle Based 3D printer: A Review |
Abstract
|
Tridib Kumar Mahata, Anusuya Roy |
|
Vol 7, No 1 (2021) |
Minimal Reduction of Fuel Consumption and Pollution with the Performing a New Design of Flat Engines by Simulation |
Abstract
|
Esmaeil Mirmahdi, Mohammad Saberi |
|
Vol 5, No 1 (2019) |
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method |
Abstract
|
Kishor Purushottam Kolhe, Melkamu Teshome, Aragaw Mulu |
|
Vol 3, No 2 (2017) |
Parameter Optimization of Electro Discharge Machining of AISI P20 Steel Material |
Abstract
|
Vivek Khokkar, Nilambujj Anand |
|
Vol 4, No 2 (2018) |
Performance Analysis of Simple Air Standard Cycle |
Abstract
|
Muthuraman Subbiah, Ramesh Rudrapati, S. Rajkumar, M. Sivaraj |
|
Vol 9, No 1 (2023) |
Power and Precision Combined: Innovating the Grinding Industry with a Hybrid-Powered Grinding Mill |
Abstract
|
Vikas Ranjan, V. Lokesh Kumar, V. Murali ., Ch. Satish ., V. Lalu Prasad, P.V.N. S. Praveen |
|
Vol 4, No 1 (2018) |
Predictive Model on Constant Pressure Drop Variable: Area Fluid Flow System in a Pipe |
Abstract
|
C. Ukpaka, Tamuno-omie Alalibo |
|
Vol 4, No 1 (2018) |
Pumping Fluid Using Pendulum Device |
Abstract
|
Shaikh Asif, Shaikh Alif, Khan Iqbal, Golde Rahul |
|
Vol 9, No 1 (2023) |
Remotely Operated Underwater Vehicle (ROV): State of the Art |
Abstract
|
Sk Tanbir Islam, Peeraj Mazumder, Amrita Pradhan, Sourav Dey, Arka Bhattacharjee |
|
Vol 9, No 2 (2023) |
Review on the Enhancing the Heat Transfer Rate in the Air Heater by Modifying the Design |
Abstract
|
Yashvardhan Singh Baghel, Shivendra Singh, Pankaj Shrivastava |
|
Vol 3, No 1 (2017) |
Review on the Mechanics of Lightweight 3-D Graphene Assembly |
Abstract
|
Amit Garg |
|
Vol 6, No 2 (2020) |
Review on Thermoelectrical Generator and Software Analysis of Exhaust System |
Abstract
|
Ritesh Kumar, Hemant Kumar Tandon |
|
Vol 3, No 2 (2017) |
Review Study on Experimental Investigation of Heat Transfer Using Al2O3 and CuO Nanoparticles with Water as Base Fluid Through Circular Tube of Heat Exchangers |
Abstract
|
Abhijeet Sinha, Ankita Sharma |
|
Vol 9, No 2 (2023) |
Robotic Path: Analysis of Algebraic Topological Properties of Stream Lines Due to Source-Sink, Dipole and Vortex |
Abstract
|
Mohammed Mukhtar Mohammed Zabih |
|
Vol 3, No 1 (2017) |
Roller Burnishing Process on Surface Hardness |
Abstract
|
Anup Kumar Ranjan |
|
Vol 3, No 2 (2017) |
Snow Compression Property Assessment Using Several Cross-Section Compression Pressure Vessels |
Abstract
|
Minoru Ishiguro |
|
Vol 7, No 1 (2021) |
Software Simulation of Thermoelectro-Mechanical Systems: A Review |
Abstract
|
Mausam Kumar Ray, Dharmendra Rathore |
|
Vol 6, No 1 (2020) |
Solar Assisted Dehumidification Systeme Using Liquid Desiccant (Fabrication) |
Abstract
|
Abhishek Kumar, Pradip Pimple, Nayan Thakur, Pravin Palve |
|
Vol 5, No 1 (2019) |
Solar passive building cooling - Recent trends and novel approaches |
Abstract
|
Anfas Mukram T, Joseph Daniel |
|
Vol 3, No 1 (2017) |
Stress Intensity Factor in Artificially Damaged Structures |
Abstract
|
Neeraj Sharma |
|
51 - 75 of 81 Items |
<< < 1 2 3 4 > >> |