A Review on Design and Development of Electric Weeder of 2 Blades
Keywords:
Battery, Motor, Weeding Blade, Field.Abstract
Weed management is most important operation in agriculture. Weed is a plant that is unwanted in particular situation because it grows in wrong place. Weeds reduce the productivity of farm. Generally farmer use three types of weed control methods which include hand hoe, manual weeder and chemical weed control, but chemical weed control reduces the quality of soil. Hand hoe weed removing is conventional weeding method which is more time consuming to remove weed from field 1 labour takes around Rs. 300 for 6 hours. Manual weeder is also time consuming while pushing weeder it requires more power. To overcome this problem, we decided to make a battery operated an electric weeder which will be used to reduce human effort.References
Mathan. M, Sathish Kumaraan. B, Selvam T, Yuvarajan Babu. P, Yogesh. G, “Design and
Analysis of Battery Powered Weeder”, International Journal of Engineering Science and
Computing, Volume 9 Issue No.3 March 2019
Khandare Suresh Vasudev, Kale Ajaykumar Vardhman, Gawai Shubham Anil, Khandare Sarthak
Rajiv, Prof. Amar. A. Kale, “Design and Fabrication of Mini Soil Tiller and Weeder”, International
Engineering Research Journal, Volume 2 Issue 12 Page 4538-4542, 2018 ISSN 2395-1621
Rajashekar M., V.K. Hebilkar, S. Mohan Kumar, “Simulation and Analysis of Low Cost Weeder”
International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-
Volume: 03 Special Issue: 03 | May-2014 | NCRIET-2014.
Anurag Dwivedi, Ankush Doltade, Sarthak Lahane, Prof. Amol Bhagat, “Design and Development
of solar powered weeding Machine”, International Journal of Scientific & Engineering Research,
Volume 9, Issue 5, May-2018 ISSN 2229-5518.
Dr. M. Karthik, P. Shanmathi, R. Shankar, P. Sivandharshini, “Solar Fed automatic Rover For Grass
Land Fields” International Journal of Engineering Trends And Applications, Volume 6,issue no
,Mar-April 2019
Laukik P. Raut, Smit B. Jaiswal and Nitin Y. Mohite, “Design, development and fabrication of
agricultural pesticides sprayer with weeder”, International Journal of Applied Research and Studies,
, Volume 2, Issue 11, Pp-1-8.
Shridharh S., “Development of Single wheel multi use manually operated Weed remover”
International Journal of Modern Engineering Research (IJMER) Vol. 3, Issue. 6, Nov - Dec. 2013
pp-3836-3840 ISSN: 2249-6645.
D. Ramesh and H.P. Girishkumar, “Agriculture Weeder Equipments: A Review”, International
Journal of Science, Engineering and Technology Research, 2014, Volume 3, Issue 7, Pp-1987-1992.
M.G. Jadhav, “Design and fabrication of manually operated weeder with pesticides sprayer”,
International Journal of Engineering Research and Technology, Vol03, PP:763-767,2016.
Manish Chavan, Sachin Chile, Ashutosh Raut, “Design, development and analysis of weed removal
machine” on volume3 issue may 2015 pp-(526-532)
Kare K.M, Adsul Siddharth, Ejgar Shubham, Raut Sangram, Vyavhare Nikhil, “Battery Drive
Motorized Agriculture Weeder: A Review”, Journal of Emerging Technologies and Innovative
Research June 2019, Volume 6, Issue 6.
Akash Singh, Kartik Srivastava, Kaushal Kr. Yadav, Kishan Singh, “Design and Fabrication of
Battery Operated Agricultural Weeder”, International Journal of Research in Engineering, Science
and Management Volume-2, Issue-12, December-2019
Dr. V. Jayaseelan, R. Magesh Kumar, M. Maya Kannan, “Design and Fabrication of BatteryOperated Weeder Machine” Volume-7 Issue- 5 May 2020 [Available from]
