Technical review on study of Mechanical properties of component using FDM technique in 3D Printing
Keywords:
Additive Manufacturing, Fused Deposition Modelling, Mechanical Properties, DensityAbstract
One of the famous Additive Manufacturing methods for a range of application is Fused Deposition
Modelling (FDM). Fused Deposition Modelling (FDM) is a method for building three-dimensional
geometries layer by layer. The FDM technology, also known as fused deposition modelling, is reasonably
priced, safe for the environment, and appropriate for complicated geometries. Minimize waste of material;
enhance component density and decrease prices are all aims. This article provides a detailed examination
of the variables that directly impact mechanical qualities of components made using the Fused Deposition
Modelling (FDM) technology, such as tensile strength, compressive strength, and bending strength. A
review like this one can help researchers in a related subject choose the optimum optimization method
since component density affects a material's mechanical strength. According to research conducted by a
number of academics, it is crucial to study the mechanical characteristics of materials with various
densities.
References
Rishi Kumar & Himanshu Sharma, A Comparative Study on the Life Cycle Assessment of a 3D
Printed Product with PLA, ABS & PETG Materials, Procedia CIRP 107 (2022) 15–20
S.M. Fijul Kabir & Kavita Mathur, A critical review on 3D printed continuous fiber-reinforced
composites: history, mechanism, materials and properties, (2019) Published by Elsevier, S0263-
(19)32270-6
Pavan Kumar Penumakala & Jose Santo, A critical review on the fused deposition modeling of
thermoplastic polymer composites, 1359-8368/© (2020) Elsevier Ltd
Li Yuan & Songlin Ding, Additive Manufacturing technology for porous metal implant
applications and triple minimal surface structures: A review, Bioactive Materials 4 (2019) 56–70
Carla M. Ferreira & Carlos M.S.Vicente, Characterization of 3D printed ABS specimens under
static and cyclic torsional loadings, Procedia Structural Integrity 34 (2021) 205–210
F. Saenz & C. Otarola, Influence of 3D printing settings on mechanical properties of ABS at room
temperature and 77 K, Published by Elsevier, Additive Manufacturing 39 (2021) 101841
Sunpreet Singh & Seeram Ramakrishna, Material issues in Additive Manufacturing: A review,
published by Elsevier Ltd, Journal of Manufacturing Processes 25 (2017) 185–200
Rahul Roy & Abhijit Mukhopadhyay, Tribological studies of 3D printed ABS and PLA plastic
parts, 2214-7853 (2020) Elsevier Ltd
Daniel Foltut & Estera Valean, The influence of temperature on mechanical properties of 3D
printed and injection molded ABS, 2214-7853/Copyright (2023) Elsevier Ltd
Chamil Abeykoon & Pimpisut Sri-Amphorn, Optimization of fused deposition modeling
parameters for improved PLA and ABS 3D printed structures, Production and hosting by
Elsevier, International Journal of Lightweight Materials and Manufacture 3 (2020) 284e297.
Lei Zhang & Guojing Yang, Three-dimensional (3D) Printed Scaffold and Material Selection for
Bone Repair, Acta Biomaterialia(2018) S1742-7061(18)30702-5
Ans Al Rashid & Shoukat Alim Khan, Additive Manufacturing: Technology, applications,
markets, and opportunities for the built environment, Published by Elsevier, Automation in
Construction 118 (2020) 103268
Nurul Husna Mohd Yusoff & Chien Hwa Chong, Optimization strategies and emerging
application of functionalized 3D-printed materials in water treatment: A review, Published by
Elsevier, Journal of Water Process Engineering 51 (2023) 103410
Leipeng Yang & Shujuan Li, Experimental Investigations for Optimizing the Extrusion
Parameters on FDM PLA Printed Parts, Journal of Materials Engineering and Performance,
(2018) 1059-9495
Alexander Paolini & Stefan Kollmannsberger, Additive Manufacturing in construction: A review
on processes, applications, and digital planning methods, Published by Elsevier, (2019) 100894
Yubo Tao & Fangong Kong, A review on voids of 3D printed parts by fused filament fabrication,
journal of materials research and technology (2021);15:4860e4879
M. Manoj Prabhakar & A.K. Saravanan, A short review on 3D printing methods, process
parameters and materials, 2214-7853, (2020) Elsevier Ltd
Junior Nomani & Daniel Wilson, Effect of layer thickness and cross-section geometry on the
tensile and compression properties of 3D printed ABS, (2019) Published by Elsevier, S2352-
(19)30078-9
John Ryan C. Dizon & Alejandro H. Espera Jr, Mechanical characterization of 3D-printed
polymers, published by Elsevier, Additive Manufacturing 20 (2018) 44–67
Manav Doshi & Ameya Mahale, Printing parameters and materials affecting mechanical
properties of FDM-3D printed Parts: Perspective and prospects, published by Elsevier, Materials
Mechanical Properties niraj makwana
Mechanical properties (2018) 1-10 © STM Journals2013. All RightsPage 7
Today: Proceedings 50 (2022) 2269–2275
Website
https://3dprinterchat.com/fdm-is-short-for-fused-deposition-modeling/
