Flow Visualization of Double Jet Impingement on Flat Surfaces

Authors

  • P.V. Goggal Assistant Professor, Department of Mechanical Engineering, BLDEA’s Dr.P.G.Halakatti College of Engg & Technology Vijayapur, Karnataka
  • R.S. Kondaguli Assistant Professor, Department of Mechanical Engineering, BLDEA’s Dr.P.G.Halakatti College of Engg & Technology Vijayapur, Karnataka
  • H.K. Amarnath Professor, Don Bosco College of Engineering, Fatorda, Margao, Goa,

Keywords:

Double jets, Jet impingement, Vortex, Entrainment, Flow visualization

Abstract

The flow visualization of jet impingement on flat surfaces is typically used in the power generation of gas turbine blades. The flow visualization is used to verify the impinging technique and used as fundamental concepts for later comparison to the behavior of the air jets. The most significant properties of jet behavior are a unique Reynolds number effect and a radial change of the potential core length due to vortex entrainment. The experimental investigation of this work consists of flow visualization of double jet with the center distance between the jets 20 mm apart, impinging on flat plate. Jet interference will not exist before the impingement on the plate. The vortices are described at different H/D ratios.

References

P.V. Goggal, R.S. Kondaguli, H.K. Amarnath. Flow Visualization of Double Jet Impingement on Flat Surfaces. International Journal of Mechanical Dynamics & Analysis. 2019; 5 (1): 14–18p.

Downloads

Published

2019-06-19

Issue

Vol. 5 No. 1 (2019)

Section

Articles