“MODIFIED SEWING MACHINE WORKSTATION DESIGN BY USING TAGUCHI APPROACH”
DOI:
https://doi.org/10.37628/ijmmp.v2i2.174Abstract
The study was based on design of experiment using Taguchi Orthogonal Array with three parameters namely height of sewing machine table, angular movement of sewing machine table & sliding movement of sewing machine table considered for experimentation. An orthogonal Array of L9 experimental design was adopted & 3 angles namely trunk angle, head angle & neck angle was measured for each experimental run. Then the reading for female & male operator was separated & the qualitative analysis has been done on the basis of operator’s opinion. From this qualitative analysis the optimize position for sewing machine operator has been determined so that operator’s can work longer without any stress at back.(i.e Risk of musculoskeletal disorder would be lower)References
Books:-
Roebuck, J.A., Kroemer, K.H.E., Thomson, W.G., 1975. Engineering Anthropometry
Method, 2nd Edition.
Bolstad, G., Benum, B., Rokne, A., 2001. Anthropometry of Norwegian light industry
and office workers.
Ergonomic Handbook for the Clothing Industry Published by the Union of
Needletrades, Industrial and Textile Employees, the Institute for Work & Health, and the
Occupational Health Clinics for Ontario Workers, Inc.
Journals:-
Punnett, L., Robins, J.M., Wegman, D.H., Keyserling, W. M. Soft tissue disorders in
the upper limbs of female garment workers, Scandinavian journal of work,
environment & health, 1985, vol. 11, p. 417-425.
Westgaard, R.H., Jansen, T. Individual and work related factors associated with
symptoms of musculoskeletal complaints, Different risk factors among sewing
machine operators. Br J Ind Med, 1992, vol. 49, p. 154-162.
T.J. Armstrong, L. Punnett, P. Ketner, Subjective worker assessments of hand tools
used in automobile assembly, American Industrial Hygiene Association Journal 50
(12) (1989) 639–645.
Brochure: "Ergonomie an Näharbeitsplätzen – Ratgeber für die Praxis"(BGI 804-2). With
extensive explanations, tables, pictures and images (Only in German available)
2 3 4 5 6 7 8 9
Average Rating -0.2 -0.8 0 1.2 0.4 1.2 1.2 3.2 0.6
-1
-0.5
5
5
5
5
Low High
Average Rating
Ariens, G.A., van Mechelen, W., Bongers, P. M., Bouter L.M., van der Wal, G.
Physical risk factors for neck pain, Scandinavian journal of work environment &
health, 2000, vol. 26, no. 1, p. 7-19.
Delleman, N.J., Dul, J. Sewing machine operation: workstation adjustment, working
posture, and workers’ perceptions, International Journal of Industrial Ergonomics,
, vol. 30, p. 341-353.
Vihma, T., Nurminen, M., Mutanen, P. Sewing-machine operators’ work and
musculoskeletal complaints, Ergonomics, 1982, vol. 25, no. 4, p. 295-298.
Websites:-
