Performance Analysis of Simple Air Standard Cycle

Authors

  • Muthuraman Subbiah Assistant Professor, Department of Mechanical and Industrial Engineering, Higher College of Technology, Muscat
  • Ramesh Rudrapati Assistant Professor, Department of Mechanical Engineering, Hawassa University, Hawassa
  • S. Rajkumar Assistant Professor, Department of Mechanical Engineering, Hawassa University, Hawassa
  • M. Sivaraj Assistant Professor, Department of Mechanical Engineering, Hawassa University, Hawassa

DOI:

https://doi.org/10.37628/ijmd.v4i2.734

Keywords:

Brayton cycle, efficiency, performance analysis, power

Abstract

In this study, the execution examination of the straightforward Brayton cycle is considered. The net power and aggregate productivity of framework are picked as the execution criteria. The variable parameters chosen for investigation are the compressor weight proportion and encompassing temperature. The other variables are accepted consistent. The conditions for ascertaining the force and productivity are defined as an element of these choice variables. Accordingly, the created model has been explained and the outline conditions giving the most extreme force and efficiency have been resolved.

References

Najjar YSH. Efficient use of energy by utilizing gas turbine combined systems. Appl Thermal Eng. 2001; 21: 407–438p.

Najjar YSH. Gas turbine cogeneration systems: a review of some novel cycles. Appl Thermal Eng. 2000; 20: 179–197p.

Ameri M, Hejazi SH, Montaser K. Performance and economic of the thermal energy storage systems to enhance the peaking capacity of the gas turbines. Appl Thermal Eng. 2005; 25: 241–251p.

Teppenstall T. Advanced gas turbine cycles for power generation: a critical review. Appl Thermal Eng. 1998; 18: 837–846p.

Çetinkaya S, Gaz Türbinleri. Nobel Yayınları; 1999.

Shukla AK, Singh O. Performance evaluation of steam injected gas turbine based power plant with inlet evaporative cooling. Appl Thermal Eng. 2016; 102: 454–464p.

Çengel YA, Boles MA, Termodinamik: Mühendislik Yaklaşımıyla. Güven Kitabevi: 2008.

De PM, Dick E. Cycle improvements to steam injected gas turbines. Int J Energy Res. 2000; 24(12): 1081–1107p.

Horlock JH. Aero-engine derivative gas turbines for power generation: thermodynamic and economic perspectives. J Eng Gas Turb Power. 1997; 19: 119–123p.

Sa AD, Zubaidy SA. Gas turbine performance at varying ambient temperature. Appl Thermal Eng. 2011; 31: 2735–2739p.

Zhang W, Lingen O, Fengrui S. Power and efficiency optimization for combined Brayton and inverse brayton cycles. Appl Thermal Eng. 2009; 29(14–15): 2885–2894p.

Basrawi F, Yomada T, Nakanishi K, Naing S. Effect of ambient temperature on the performance of micro gas turbine with cogeneration system in cold region. Appl Thermal Eng. 2011; 31 (6–7): 1058–1067p.

Erdem HH, Sevilgen SH. Case study: effect of ambient temperature on the electricity production and fuel consumption of a simple cycle gas turbine in Turkey. Appl Thermal Eng. 2006; 26(2–3): 320–326p.

Zadpoor AA, Golshan AH. Performance improvement of a gas turbine cycle by using a desiccant-based evaporative cooling system. Energy. 2006; 31: 2652–2664p.

Lee JJ, Kang DW, Kim TS, Development of a gas turbine performance analysis program and its application. Energy. 2011; 36: 5274–5285p.

Carniere H, Willocx A, Dick E, Paepe MD. Raising cycle efficiency by inter cooling in air cooled gas turbine. Appl Thermal Eng. 2006; 26(16): 1780–1787p.

Silveira JL, Tuna CE. Thermo economic analysis method for optimization of combined heat and power systems. Progr Energy Combust Sci. 2003; 29: 479–485p.

Downloads

Published

2018-12-05

Issue

Vol. 4 No. 2 (2018)

Section

Articles