Open Access Open Access  Restricted Access Subscription or Fee Access

Finite Element Modelling and Structural 3d Static of the Mechanical Behavior of Dry Contacts Slipping Between the Disc and the Brake Pads

Ali Belhocine, Oday Ibraheem Abdullah

Abstract


The aim of this contribution is to present a study based on the determination of the structural deformations due to the contact of slipping between the disc and the pads. The results of contact described in this work relate to displacements, Von Mises stress and contact pressures of the pad at various moments of simulation. One precedes then the influence of some parameters on the computation results such as rotation of the disc, the smoothness of the mesh, the material of the brake pads and the friction coefficient enter the disc and the pads, the disc material, the pads groove.

Keywords: finite element method (FEM), ventilated disc brake, gray cast iron , total distortion, shear stress.

Full Text:

PDF

References


Tajan N. and Mac-Lan. T. “Modélisation thermomécanique des disques de freinpar une approche eulérienne ” Thèse de doctorat de l’école polytechnique-spécialité mécanique des solides. (2002).

Reibenschuh, M. Oder, G. Čuš F. and Potrč. I. “ Modelling and Analysis of Thermal and Stress Loads in Train Disc Brakes ” – Stro.J Vestn-J. Mech .E 55(7-8), (2009), 494-502.

Subramanian, P M . and Oza. D. “Strength analysis of a ventilated brake disc-hub assembly for a multi-utility vehicle. ” Int.Res.J.Eng. Technol (2(2), (2015) 726-730.

Shinde, N. B. and Borkar. B.R. “CAD& F.E.M. Analysis of disc brake system ”.In .J.Eng.Comput.Sci.,4(3), (2015), 10697-10706.

Jungwirth, F. Dornheim, A. and Friedrich.C. “Coupled thermo-mechanical computation method for a virtual design processes of brake discs ”,Proc. 11th World Congress on Computational Mechanics (WCCM XI), (2014), pp.1-10.

Söderberg A. and Andersson, S. “Simulation of wear and contact pressure distribution at the pad-to-rotor interface, in the disc brake using general purpose finite element analysis software ”, Wear 267,12(1), (2009). pp. 2243–2251.

Abdullah , O.I. Schlattmann J. and Al-Shabibi. A.M. “ Stresses and deformations analysis of a dry friction clutch system ”,Proc. 13th International Conference on Tribology, Serbiatrib’13Kragujevac, Serbia, (2013) pp.210-216, 15-17

Dhiyaneswaran, S. and Amirthagadeswaran.K. S. “Comparative Study of Disc Brake Materials through Computer Aided Engineering. ” Int.J.Mod.Eng.Res. (2014). pp. 173-179.

Sharath Kumar, T. and Vinodh.S. “Novel Design and Analysis of a Brake Rotor, ” World Acad Sci Eng Technol, 6(1), (2012), pp. 523-525.

Belhocine, A. and Bouchetara, M. “Thermomechanical modeling of dry contact in automotive disc brake. ” Int.J.Therm.Sci,60, (2012). pp. 161–170.

Belhocine, A.,Ghazali, N.M. and Abdullah O.I.. “Structural and Contact Analysis of a 3-Dimensional Disc-Pad Model with and without Thermal Effects ”, Tribol.Ind., 36(4), (2014). pp. 406-418.

Belhocine, A., Abu Bakar, A.R. and Abdullah, O.I. . “Structural and Contact Analysis of Disc Brake Assembly During Single Stop Braking Event ”. Trans Ind Inst Met,68(3), (2015) pp. 403-410.

Yildiz, Y. and Duzgun. M. “Stress analysis of ventilated brake discs using the finite element method, ” Int. J. Auto.Tech,11(1), (2010), pp. 133-138.

Magnain. B. “Développement d’algorithmes et d’un code de calcul pour l’étude des problèmes de l’impact et du choc. ” Thèses de doctorat de l’université d’évry –val d’essonne, Novembre (2006).

Coudeyar. N. “Analyse non-linéaire des instabilités multiples aux interfaces frottantes:Application au crissement de frein ” Thèse de doctorat de l’école centrale de Lyon-spécialité: mécanique, December (2009)..

Abu Bakar, A. R., Ouyang H. and Cao, Q. “Interface Pressure Distributions through Structural Modifications”. SAE Technical Paper 2003-01-3332,(2003)..

Cueva, G. Sinatora,, A. Guesser,, W.L. Tschiptschin, A.P.; “Wear resistance of cast irons used in brake disc rotors ”, Wear 255 , (2003) 1256–1260.




DOI: https://doi.org/10.37628/jsmfe.v2i1.108

Refbacks

  • There are currently no refbacks.