|
Issue |
Title |
|
Vol 7, No 1 (2021) |
International Journal of Manufacturing and Materials Processing |
Abstract
|
B.G. Toksha, Vivek Bagul, T.P. Kulkarni, J.M. Kshirsagar, A.T. Autee |
|
Vol 4, No 1 (2018) |
Investigation of Optimal Process Parameters of Extrusion Blow Molding Process Using Grey Taguchi Analysis |
Abstract
|
Jyoti Dohare, Vedansh Chaturvedi, Jyoti Vimal |
|
Vol 2, No 2 (2016) |
Investigation on the influence of calcium Fluoride and Barium Fluoride on cutting performance during hard turning with minimal fluid application |
Abstract
|
P SAM PAUL, A S Varadarajan |
|
Vol 7, No 2 (2021) |
Lean Conceptual Model for SMEs using 5S |
Abstract
|
Vinod D. Shejwal, Sunil R. Andhale, Sandeep B. Pankade, Milind M. Dhobe |
|
Vol 8, No 1 (2022) |
Lean Manufacturing |
Abstract
|
Shweta Varshney |
|
Vol 6, No 1 (2020) |
Manufacturing of Composite Material Using Sugarcane Bagasse and Waste Plastic for Household Warm Protection |
Abstract
|
Madhukar B. Sorte, Akash Gadhav, Aniket Hadawale, Rabishankar Raut |
|
Vol 4, No 1 (2018) |
Manufacturing of Reinforced Composite Fly Ash Bricks – Product Analysing and Development Using Value Engineering Techniques |
Abstract
|
M. Aravindh, Pl. K. Palaniappan, T. Mohamed Azarudeen |
|
Vol 6, No 2 (2020) |
Microstructural and Hardness Study of A390/20wt.% SiC Functionally Graded Metal Matrix Composite |
Abstract
|
Amal Vijay, Prem Kumar J., S. Anoop Kumar |
|
Vol 5, No 2 (2019) |
Microstructural and Mechanical Behavior of Al6082/SiC/Gr Hybrid Composites |
Abstract
|
Pardeep Sharma |
|
Vol 2, No 2 (2016) |
Modeling of 6 DOF Shake Table and Its Control |
Abstract
|
Ranjith Pillai, R. Mathiazhagan, P. Karthikeyan, Shiju Varghese, N. L. Soni, R. J. Patel |
|
Vol 8, No 2 (2022) |
Multi Criteria Optimization in Drilling Process of Glass Fibre Reinforced Polymer Using Grey Based Taguchi Analysis |
Abstract
|
Veerabhadrappa Algur, Vital Rao Chavan, C Thotappa, Latha B, Satyanarayan ., Poornima Hulipalled, V Lokesha |
|
Vol 2, No 1 (2016) |
Multi-class Fault Diagnosis of Rolling Element Bearing Based on Empirical Mode Decomposition and Entropy Features |
Abstract
|
Swarup Kumar Laha |
|
Vol 5, No 1 (2019) |
Multi-objective Optimization of Weld Bead Geometry of Micro-plasma Arc Welded Titanium (Ti–6Al–4V) Alloy Sheets Using TOPSIS |
Abstract
|
M. Sumalatha, V.V.S. Kesava Rao |
|
Vol 3, No 2 (2017) |
Optimization of CNC Machining Parameter for Al6061 to Improve Surface Roughness and Material Removal Rate |
Abstract
|
Virendrasinh Vitthal Chavan, M. A. Sutar |
|
Vol 4, No 1 (2018) |
Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS |
Abstract
|
Vinay Bhardwaj, M. K. Gaur, Vedansh Chaturvedi, Saurabh Agrawal |
|
Vol 3, No 2 (2017) |
Parametric Appraisal for Compression Behaviour of Machine Made Carpet: Exploration of Taguchi Optimisation Techniques |
Abstract
|
Rajesh Kumar Verma, Anupam Agarwal, Piyush Srivastava, Sanjay Kumar Giri |
|
Vol 2, No 1 (2016) |
Productivity improvement in a four wheeler seat manufacturing industry using lean techniques |
Abstract
|
Senthilnathan .B, Gomathi Prabha M |
|
Vol 9, No 1 (2023) |
Propeller Shaft Energy Recovery: A Pathway to Sustainable Power Generation |
Abstract
|
Kamlesh.S. Mahajan, Parvez Patel, Prasad Patil, Shubham Pandure, Shivprasad Kale |
|
Vol 5, No 2 (2019) |
Properties in Materials for Car Frame Structure |
Abstract
|
Bangshidhar Goswami, Sanatan Prasad, Gyan Shankar Sharma, Jeevan Kumar, Satyendra Prasad Singh |
|
Vol 2, No 1 (2016) |
Review of Optimization Process Parameters in Welding system |
Abstract
|
Noor Hussain Khan |
|
Vol 7, No 2 (2021) |
Review on Recent Trends in Laser Assisted Machining of Hard to Cut Materials |
Abstract
|
Faisal. M. Ali, S.K. Biradar |
|
Vol 2, No 1 (2016) |
Risk Assessment And Analysis In A Chemical Industry |
Abstract
|
M. Ananthu, A. P. Arun |
|
Vol 2, No 2 (2016) |
Risk Assessment Using WRAC Tool in a Manufacturing Industry |
Abstract
|
K. Adrin Michael Franc, S. Bhaskar |
|
Vol 3, No 2 (2017) |
Selection of Gear Materials Using MCDM-TOPSIS Approach |
Abstract
|
Sunil Kumar Tiwari, Sarang Pande |
|
Vol 6, No 2 (2020) |
Six Sigma (DMAIC) Approach to Optimise Operation Variables in High Pressure Die Casting |
Abstract
|
Suraj R. Marathe, Carmo E. Quadros |
|
51 - 75 of 87 Items |
<< < 1 2 3 4 > >> |