| Issue | Title | |
| Vol 1, No 2 (2016) | A Comprehensive Study of Fault Diagnostics of Roller Bearings Using Continuous Wavelet Transform | Abstract |
| V Sugumaran, Aditya Vasudev Rao, K. I. Ramachandran | ||
| Vol 1, No 1 (2016) | A Comprehensive Study On Optimization Of Neural Networks And Global Minimization | Abstract |
| M. Aravindh, C. Velmurugan | ||
| Vol 3, No 1 (2017) | A Review on Layer Formation Studies in Selective Laser Melting of Steel Powders and Thin Wall Parts Using Pulse Shaping | Abstract |
| Aarti Gupta | ||
| Vol 3, No 1 (2017) | Analysis of Physical Properties and Fabrication of Silicon Carbide, Graphite and Fly Ash Reinforced Metal Matrix Composites | Abstract |
| Jaspreet Singh | ||
| Vol 3, No 2 (2017) | Analysis of Tensile Strength Properties for FG260 Welded Cast Iron: A Review | Abstract |
| Mahendra Pramod Waradkar, M. A. Sutar | ||
| Vol 3, No 2 (2017) | Cutting Force Analysis on the Vegetable Oil-Based Cutting Fluid in Turning of EN8 Steel | Abstract |
| M. Ganchi | ||
| Vol 1, No 1 (2016) | Effect of Cutting Parameters in Hard Turning on Chip Formation and Machined Surface | Abstract |
| Shambhu Choubisa, B. P. Nandawana, M. A. Saloda, M. S. Khidiya | ||
| Vol 4, No 1 (2018) | Effect of Heat Treatment on Fatigue Behavior of Carbon Steel | Abstract |
| Musadiq Rasool | ||
| Vol 1, No 2 (2016) | Elements of Supply Chain Management: The Review | Abstract |
| Vasdev Malhotra | ||
| Vol 4, No 1 (2018) | Experimental Investigation of MRR and Surface Finish Using Abrasive Jet Machining of Aluminum Alloy 7475 | Abstract |
| V. Mouni Sashi Tej, V. Lahari Kiran | ||
| Vol 1, No 2 (2016) | Fault Diagnosis of Helical Gear Box Using Variational Mode Decomposition with Naïve Bayes and Bayes Net Classifiers through Vibration Signals | Abstract |
| A. Kannan, V. Sugumaran, M. Amarnath, K. P. Soman | ||
| Vol 1, No 2 (2016) | Increasing an overall equipment effectiveness visibility and analyzing in a manufacturing industry | Abstract |
| ARUN K S | ||
| Vol 4, No 1 (2018) | Investigation of Optimal Process Parameters of Extrusion Blow Molding Process Using Grey Taguchi Analysis | Abstract |
| Jyoti Dohare, Vedansh Chaturvedi, Jyoti Vimal | ||
| Vol 1, No 2 (2016) | Investigation on the influence of calcium Fluoride and Barium Fluoride on cutting performance during hard turning with minimal fluid application | Abstract |
| P SAM PAUL, A S Varadarajan | ||
| Vol 4, No 1 (2018) | Manufacturing of Reinforced Composite Fly Ash Bricks – Product Analysing and Development Using Value Engineering Techniques | Abstract |
| M. Aravindh, Pl. K. Palaniappan, T. Mohamed Azarudeen | ||
| Vol 1, No 2 (2016) | Modeling of 6 DOF Shake Table and Its Control | Abstract |
| Ranjith Pillai, R. Mathiazhagan, P. Karthikeyan, Shiju Varghese, N. L. Soni, R. J. Patel | ||
| Vol 1, No 1 (2016) | Multi-class Fault Diagnosis of Rolling Element Bearing Based on Empirical Mode Decomposition and Entropy Features | Abstract |
| Swarup Kumar Laha | ||
| Vol 3, No 2 (2017) | Optimization of CNC Machining Parameter for Al6061 to Improve Surface Roughness and Material Removal Rate | Abstract |
| Virendrasinh Vitthal Chavan, M. A. Sutar | ||
| Vol 4, No 1 (2018) | Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS | Abstract |
| Vinay Bhardwaj, M. K. Gaur, Vedansh Chaturvedi, Saurabh Agrawal | ||
| Vol 3, No 2 (2017) | Parametric Appraisal for Compression Behaviour of Machine Made Carpet: Exploration of Taguchi Optimisation Techniques | Abstract |
| Rajesh Kumar Verma, Anupam Agarwal, Piyush Srivastava, Sanjay Kumar Giri | ||
| Vol 1, No 1 (2016) | Productivity improvement in a four wheeler seat manufacturing industry using lean techniques | Abstract |
| Senthilnathan .B, Gomathi Prabha M | ||
| Vol 1, No 1 (2016) | Review of Optimization Process Parameters in Welding system | Abstract |
| Noor Hussain Khan | ||
| Vol 1, No 1 (2016) | Risk Assessment And Analysis In A Chemical Industry | Abstract |
| M. Ananthu, A. P. Arun | ||
| Vol 1, No 2 (2016) | Risk Assessment Using WRAC Tool in a Manufacturing Industry | Abstract |
| K. Adrin Michael Franc, S. Bhaskar | ||
| Vol 3, No 2 (2017) | Selection of Gear Materials Using MCDM-TOPSIS Approach | Abstract |
| Sunil Kumar Tiwari, Sarang Pande | ||
| 1 - 25 of 29 Items | 1 2 > >> | |