Open Access Open Access  Restricted Access Subscription or Fee Access

Design and Analysis of Centrally Suspended Cage-less Limited Slip Differential

Tangeti Naga Sai Sravan, Siva Prasad Kondapalli

Abstract


Limited slip differential (LSD) plays an important role in maintaining speeds and in torque distribution between the wheels of the automobile even in case of variable traction. In the present project work, limited slip differential is considered and the objective of the project is to find out tangential, axial and radial forces involved in meshing of the differential gears theoretically. Finite Element Analysis (FEA) is carried out on Final, Crown, Side and Ring gears made of 20MnCr5 material and running at a speed of 4000rpm and torque of 122N-m. From the analysis, it is found that the forces and stresses obtained are below the allowable stress of the material considered in designing gears of the differential. Maximum von-Mises stress is for Ring gear and Minimum for Side gears.

 


Keywords


Centrally Suspended Cage-less Limited Slip Differential, von-Mises stresses; Beam and Wear strength; Factor of safety

Full Text:

PDF

References


Prof. A. S. Todkar, R. S. Kapare, Design Development & Testing Of Automatic Differential Locking System, International Journal of Advanced Technology, IV/III/July-Sept.,2013/97-100.

Daniel Das.A, Seenivasan.S, Karthick.S- “Structural Analysis of Differential Gearbox”, International Journal of Innovations in Engineering and Technology (IJIET), Vol 2, issue 2, April 2013, pp. 65-69.

Nilton Raposo, Jayesh Srivastava, Farhan Sultan, Design of the Differential Unit for the 2006/2007 Pace Vehicle, 2007, Thesis of bachelor of applied science, Department of Mechanical and Industrial Engineering University of Toronto. https://www.researchgate.net/profile/Jayesh_Srivastava/publication/228823542_DESIGN_OF_THE_DIFFERENTIAL_UNIT_FOR_THE_20062007_PACE_VEHICLE/links/5411a8b80cf264cee28b4cc0.pdf ( Date of access: Nov, 20, 2019)

Suraj Aru, Pravin Jadhav, Shubham Gajabhiye, Vinay Jadhav & Pratim Angane, Design and Analysis of Centrally Suspended Cage-Less Differential, International Journal of Mechanical and Production Engineering Research and Development, Vol 4, Issue 4, Aug 2014, pp.49-60.

Muhammad Safuan Bin Md Salleh, Design and Assembly Analysis of Differential Gear Box for Utem Fv Car, 2015 , Thesis, University Teknikal Malaysia Melaka. http://eprints.utem.edu.my/17790/1/Design%20And%20Assembly%20Analysis%20Of%20Differential%20Gear%20Box%20For%20UTeM%20FV%20Car%2024%20Pages.pdf (Date of access: Nov, 20, 2019)

N.Siva Teja, K. Dinesh Babu, M. Siva Nagendra, Ch. Phanideep, J. Sai Trinadh , Design And Analysis Of Differential Gear Box in Automobiles, International Journal of Mechanical Engineering And Technology, Volume 8, Issue 5, May 2017, pp. 175–185 Article ID: IJMET_08_05_019.

T.Loknadh, Dr.P.S.S.Vasu, Design A Crown Wheel Gear Of Differential Gear Box Used In Heavy Vehicles For Structural Loads, International Journal Of Science, Engineering And Technology Research, Volume 4, Issue 7, July 2015,pp.2705-2713.

Gabriele Barbaraci, Gabriele Virzì Mariotti, Giovanni Traina, On MR Differential with Limited Slip, Ethan Pulsihing company, www.ethanpublishing.com, January 25 2014,pp.1-4.

J.O.Nordiana, S.O.Ogbeide, N.N.Ehigiamusoe and F.I.Anyasi., Computer aided design of a spur gear, Journal of Engineering and Applied Sciences, Vol. 2 , Issue.12, 2007, pp 1743- 1747.

S.H.Choi, J.Glienicke, D.C.Han, K.Urlichs, Dynamic Gear Loads due to coupled lateral, Torsional and Axial Vibrations in a helical Geared System , Journal of vibration and acoustics, Vol 121,Issue.2, Apr 1999,pp.141-148.




DOI: https://doi.org/10.37628/ijmd.v5i2.994

Refbacks

  • There are currently no refbacks.