Browse Title Index


 
Issue Title
 
Vol 1, No 1 (2016) A Comparitive Study On Ceramic Powder Over Static And Dynamic Compaction Abstract
Shanmugam M. V., KARTHIKEYAN R., Divyakumar P., Nirmal Raja R.
 
Vol 3, No 1 (2017) A Coupled elastoplastic-logarithmic damage model to numerical analysis of rocks failure mechanism Abstract
Hamed Molladavoodi, mohsen abdi, hosei salarirad
 
Vol 4, No 1 (2018) A Fluid–Structure Interaction Study on the Rupture Vulnerability of Different Types of Coronary Atherosclerotic Plaque Abstract
Hamed Afrasiab
 
Vol 4, No 1 (2018) A Review on Mechanotransduction in Leiomyoma Abstract
Prashant Agarwal, Ritika Gupta
 
Vol 3, No 2 (2017) A Review on “Magnesium Alloy Applications” Abstract
Sandeep Yadav, Ankit Kumar
 
Vol 5, No 1 (2019) Application of Taguchi Technique to reduce Casting Defects Abstract
Vijaykumar H K, M.S. Uppin
 
Vol 5, No 2 (2019) Capacitive Study of Nickel Oxide Thin Films Prepared by Spray Pyrolysis Abstract
A. L. Jadhav, S. V. Kambale, R. M. Kore, B. J. Lokhande
 
Vol 3, No 2 (2017) Chemical Drain Cleaner: A Literature Review Abstract
Abhishek Kumar
 
Vol 1, No 2 (2016) Classification of Chains Based on Strength and Reliability in Machines Abstract
Chingakham Chinglenthoiba, V. Balaji, B. Abbas, A. Madhan Kumar
 
Vol 3, No 2 (2017) Comparative Experimental Investigation of Stationary and Rotating Electrode in Electric Discharge Machining Using Aqueous Glycerine Solution and EDM Oil: A Literature Review Abstract
Vishal Pathania
 
Vol 4, No 2 (2018) Comparative Studies on Mechanical Properties and Microstructure of As-cast and Retrogression and Re-Aged Aluminum-7075 Alloy Abstract
Hemavathy S, C. N. Chandrappa, Mr. Jagannath
 
Vol 5, No 2 (2019) Corrosion in Magnesium and Its Alloys Abstract
Ananth Padmanabhan, Thoguluva Raghavan Vijayaram
 
Vol 3, No 1 (2017) Creep Crack Growth in Surface Cracked Specimens and in Nickel-Based Super Alloy at Elevated Temperature Abstract
Mayank Bansal
 
Vol 6, No 1 (2020) Design and Development of Hybrid Water Cooler Abstract
Mayuresh S. Sarolkar, Rohit M. Patil, Shantanu V Wakhare, Sandeep B. Jadhav
 
Vol 4, No 1 (2018) Development of CST Element for Finite Element Modelling Analysis Abstract
Monalisa Das
 
Vol 1, No 2 (2016) Durability Aspects of Copper Slag Admixed Concrete Abstract
Akhil G, J. Karthikeyan
 
Vol 1, No 2 (2016) Dynamic Analysis on Superplastic Forming of Aluminium Alloy Sheet Abstract
G. Kumaresan
 
Vol 5, No 1 (2019) Dynamic Response Analysis of Thin Isotropic Rectangular Plates Submerged in Fluid Using a New Hybrid Method Abstract
O.M. Sadiq, M.G. Sobamowo, S.A. Salawu, A.A. Yinusa
 
Vol 3, No 1 (2017) Effects of ply sequence of adjacent plies on the determination of delamination fracture toughness in carbon/epoxy composites Abstract
Ashok Kumar Prodduturi, Ravinder Reddy Pinninti, Gupta AVSSKS
 
Vol 3, No 1 (2017) Establishment of a Fracture Initiation Pressure Prediction Model for vertical wells Based on the Elastoplastic Model Abstract
Mohammad Tabaeh Hayavi
 
Vol 4, No 2 (2018) Evaluation of Mechanical Properties of Aluminium Alloy Subjected to Grain Refinement Abstract
Praveen Kumar, T. Anil Kumar
 
Vol 5, No 2 (2019) Experimental Characterization of Hybrid Metal Matrix Composite on Mechanical Properties under Cast Conditions Abstract
Vinay Kumar, Vrashank S. Shett, Nithin Kumar, Santhosh Hosalli, Bhimappa Y.
 
Vol 4, No 2 (2018) Experimental Investigation of Influence of Tool Setting on Surface Roughness Abstract
Lokesha K, P. B. Nagaraj, P. Dinesh, Manoj K
 
Vol 4, No 2 (2018) Experimental Investigation of Tool Offset Variation on Cutting Tool Vibration Abstract
Ashish George J, Mr. Paramesh, Mr. Manoj, K. Lokesha
 
Vol 5, No 1 (2019) Fabrication and Mechanical Characterization of Sisal and Glass Fibre Reinforced Epoxy Hybrid Composites Abstract
Pranav Raveendran, Susilendra Mutalikdesai, Priyanshu ., P Sushanth, Mebin George
 
1 - 25 of 46 Items 1 2 > >>