Comparative Experimental Investigation of Stationary and Rotating Electrode in Electric Discharge Machining Using Aqueous Glycerine Solution and EDM Oil: A Literature Review
M.L. Jeswani. Effect of addition of graphite powder to kerosene used as dielectric fluid in electric discharge machining, Wear. 1981; 70: 133–9p.
M.L. Jeswani. Electric discharge machining in distilled water, Wear. 1981; 72: 81–8p.
T. Masuzawa, K. Tanaka. Water-based dielectric solution for EDM, Ann ClRP. 1983; 32/1/1983: 199–22p.
S.T. Jilani, P.C. Pandey. Experimental investigation into the performance of water as dilelectric in EDM, Int J Mach Tool Des Res. 1984; 24: 31–43p.
W. Konig, L. Jorres. Aqueous solutions of organic compounds as dielectrics for EDM sinking, Ann ClRP. 1987; 36/1/1987: 105–9p.
K.D. Kremer, J.L. Lebrun, B. Hosari, A. Moisan. Effects of ultrasonic vibrations on the performances in EDM, Ann ClRP. 1989; 38/1/1989: 199–202p.
T. Masaki, K. Kawata, T. Mauzawa. Micro electro discharge machining and its applications, IEEE. 1990; CH2832-4/90/0000-0021: 21–6p.
M. Kunieda, S. Furuoya. Improvement of EDM efficiency by supplying oxygen gas into gap, Ann CIRP. 1991; 4/7/1991: 215–8p.
J.P. Kurth, L. Stevens, L. Froyen, B. Lauwers, K.U. Leuven. Study of the white layer of the surface machined by die sinking electro discharge machining, Ann ClRP. 1995; 44/1/1995: 169–72p.
M. Kunieda, M. Yoshida. Electrical discharge machining in gas, Ann ClRP. 1997; 46/1/1997: 143–6p.
M.P. Samule, P.K. Philip. Powder metallurgy tool electrodes for electric discharge machining, Int J Mach Tools Manuf. 1997; 37: 1625–33p.
T.C. Lee, J.H. Zhang, W.S. Lau, Machining of engineering ceramics by ultrasonic vibration assisted EDM method, Mater Manuf Process. 1998; 13(1): 133–46p.
M. Kunieda, H. Muto. Development of multi-spark EDM, Ann ClRP. 2000; 49/1/2000: 119–22p.
G. Puthumana, R. Agarwal, S.S. Joshi. Experimental investigation on dry electrical discharge machining using helium gas, In: Proceedings of the 3rd International & 24th AIMTDR. 2010, 1–6p.
G. Lin, L. Lei, W. Zhao, P.R. Kamlakar. An efficient and economical rapid-tooling method for die-sinking electrical discharge machining, J Manuf Sci Eng. 2011; 133: 051004:1–7p.
H. Ken, G.S. Kapoor, D.E. Richard, S. Vijay. An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials, J Manuf Sci Eng. 2011; 133: 021002:1–9p.
G. Ahad, B. Hamid, S. Mohsen, S. Mohammadreza, Investigation of the effects of magnetic field on near-dry electrical discharge machining performance, ProcIMechE Part B: J Eng Manuf. 2014; 1–8p.
S. Joshi, P. Govindan, A. Malshe, K. Rajurkar. Experimental characterization of dry EDM performed in a pulsating magnetic field, CIRP Ann Manuf Technol. 2011; 60: 239–42p.
H. Petr, L. Bacakova, J. Strasky, M. Bacakova, K. Novotna, M. Janecek. Surface treatment by electric discharge machining of Ti–6Al–4V alloy for potential application in orthopedics, J Mech Behav Biomed Mater. 2012; 7: 96–105p.
Liqing L. and Yingjie S., “Study of dry EDM with oxygen-mixed and cryogenic cooling approaches”, Procedia CIRP, Elsevier, Vol. 6, pp. 344-350 (2013)
X. Guo, Y. Zuyuan, Z. Lv, L. Jianzhong, N. Wataru. Optimization of planetary movement parameters for micro-hole drilling by micro-electrical discharge machining, J Micro- Nano-Manuf ASME. 2013; 1: 031007:1–5p.
R. Teimouri, H. Baseri. Optimization of magnetic field assisted EDM using the continuous ACO algorithm, Appl Soft Comput. 2014; 14: 381–9p.
A. Pattabhiraman, D. Marla, S.G. Kapoor. Atomized dielectric spray-based electric discharge machining for sustainable manufacturing, J Micro- Nano-Manuf. 2015; 3: 041008:1–8p.
F. Saman, B. Hamid. Analysis of dry electrical discharge machining in different dielectric mediums, ProcIMechE Part E: J Process Mech Eng. 2015; 1–16p.
V. Kumar, P. Kumar. Experimental investigation of the process parameters in cryogenic cooled electrode in EDM, J Mech Sci. Technol. 2015; 29: 3865–71p.
H. Baseri, S. Sadeghian. Effects of nano-powder TiO2-mixed dielectric and rotary tool on EDM, Int J Adv Manuf Technol. 2015; 1–10p.
T. Gangadharudu, D.K. Sahoo, S. Gangopadhyay, C.K. Biswas. Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminium/alumina metal matrix composite, Eng Sci Technol Int J. 2015; 18: 369–73p.
G. Chengbo, D. Shichun, D. Wei. Study of electrical discharge machining performance in water-based working fluid, Mater Manuf Process. 2015; 31: 1–33p.
S. Yang, L. Yonghong, Z. Yanzhen, D. Hang, W. Sun, W. Xiaolong, C. Zheng, R. Ji. High-speed dry electrical discharge machining, Int J Mach Tools Manuf. 2015; 93: 19–25p.
K. Murahari, K. Adepu. Effect of dielectric fluid with surfactant and graphite powder on electrical discharge machining of titanium alloy using Taguchi method, Eng Sci Technol Int J. 2015; 18: 524–35p.
R.S. Mihir, D.M. Pavagadhi, V.A. Bhagora, B.C. Khatri, J.B. Valaki. Process optimization and estimation of oxygen assisted wire electrical discharge machining performance using artificial neural network, Int J Sci Res Dev. 2015; 3: 1457–63p.
U. Eckart, T.-M. Schimmelpfennig, I. Perfilov, J. Streckenbach, L. Schweitzer. Comparative analysis of Dry-EDM and conventional EDM for the manufacturing of Micro holes in Si3N4-TiN, Proc CIRP, ScienceDirect. 2016; 42: 173–8p.
D. Krishnakant, A. Dvivedi, A. Dhiman. Experimental investigation on effects of dielectric mediums in near-dry electric discharge machining, J Mech Sci Technol. 2016; 30: 2179–85p.
P.A. Dwivedi, S.K. Choudhury. Effect of tool rotation on MRR, TWR and surface integrity of AISI-D3 steel using rotary EDM process, Mater Manuf Process. 2016; 31: 1–42p.
Y. Shen, Y. Liu, W. Sun. High-efficient dry hybrid machining of EDM and Arc machining, Proc CIRP, ScienceDirect. 2016; 42: 149–54p.
Y. Shen, Y. Liu, W. Sun, Y. Zhang, H. Dong, C. Zheng, R. Ji. High-speed near dry electrical discharge machining, J Mater Process Technol. 2016; 233: 9–18p.
J.B. Valaki, R. Pravin, C.D. Sankhavara. Investigations on technical feasibility of Jatropha curcas oil based bio dielectric fluid for sustainable electric discharge machining (EDM), J Manuf Process. 2016; 22: 151–60p.
Y.-C. Lin, J.-C. Hung, H.-M. Chow, A-C. Wang, J.-T. Chen. Machining characteristics of a hybrid process of EDM in gas combined with ultrasonic vibration and AJM, Proc CIRP, ScienceDirect. 2016; 42: 167–72p.
M.N. Flores, M. Mar Barbero-Barrera, R. Bustamante. Improvement of the properties of gypsum-based composites with recycled isostatic graphite powder from the milling production of molds for Electrical Discharge Machining (EDM) used as a new filler, Constr Build Mater. 2016; 107: 17–27p.
O. Nirdesh, Z. Florian, M. Claas, H. Reinecke. The effect of the electrical discharge machining process on the material properties of nonconductive ceramics, J Micro- Nano-Manuf. 2016; 4: 011007:1–5p.
R. Surace, V. Bellantone, G. Trotta, V. Basile, F. Modica, I. Fassi. Design and fabrication of a polymeric microfilter for medical applications, J Micro- and Nano-Manuf. 2016; 4: 011006:1–7p.
Uhlmann Eckart, Tassilo-Maria Schimmelpfennig, Ivan Perfilov, Jan Streckenbach and Luiz Schweitzer, "Comparative Analysis of Dry-EDM and Conventional EDM for the Manufacturing of Micro holes in Si3N4-TiN",Procedia CIRP, ScienceDirect, Vol. 42, pp. 173-178 (2016)
Dhakar Krishnakant, Dvivedi Akshay and Dhiman Amit, " Experimental investigation on effects of dielectric mediums in near-dry electric discharge machining", Journal of Mechanical Science and Technology, Vol. 30, pp. 2179-2185 (2016)
Dwivedi P. Anand and Choudhury Sounak Kumar, "Effect of Tool Rotation on MRR, TWR and Surface Integrity of AISI-D3 Steel using Rotary EDM Process", Materials and Manufacturing Processes, Vol. 31, pp. 1-42 (2016)
Shen Y., Liu Y. and Sun W., " High-efficient Dry Hybrid Machining of EDM and Arc Machining", Procedia CIRP, ScienceDirect, Vol. 42, pp. 149-154 (2016)
Shen Y., Liu Y., Sun W., Zhang Yanzhen, Hang Dong, ZhengChao and RenjieJi, " High-speed near dry electrical discharge machining", Journal of Materials Processing Technology, Vol. 233, 9-18 (2016)
Janak B. Valaki, Rathod Pravin and Sankhavara C.D., " Investigations on technical feasibility of Jatropha curcas oil based bio dielectric fluid for sustainable electric discharge machining (EDM)", Journal of Manufacturing Processes, Vol. 22, pp. 151-160 (2016)
Yan-Cherng Lin, Jung-Chou Hung, Han-Ming Chow, A-Cheng Wang and Jyun-Ting Chen, " Machining Characteristics of a Hybrid Process of EDM in Gas Combined with Ultrasonic Vibration and AJM", Procedia CIRP, ScienceDirect, Vol. 42, pp. 167-172 (2016)
Medina N. Flores, M. Mar Barbero-Barrera and Rosa Bustamante, " Improvement of the properties of gypsum-based composites with recycled isostatic graphite powder from the milling production of molds for Electrical Discharge Machining (EDM) used as a new filler", Construction and Building Materials, Vol. 107, pp. 17-27 (2016)
Ojha Nirdesh, Florian Z., Mueller Claas and HolgerReinecke, " The Effect of the Electrical Discharge Machining Process on the Material Properties of Nonconductive Ceramics", Journal of Micro- and Nano-Manufacturing, Vol. 4, 011007:1- 011007:5 (2016)
Rossella Surace, Vincenzo Bellantone, Gianluca Trotta, Vito Basile, Francesco Modica and Irene Fassi, " Design and Fabrication of a Polymeric Microfilter for Medical Applications", Journal of Micro- and Nano-Manufacturing, ASME, Vol. 4, 011006:1- 011006:7 (2016)
- There are currently no refbacks.