Open Access Open Access  Restricted Access Subscription or Fee Access

Study on Nanotechnology, Nanocoating and Nanomaterial

Chingakham Chinglenthoiba, K. Ramkumar, T. Shanmugaraja


Future will show fascinating innovations at the development, formulation and application of industry enamels. Especially the following emphases at R&D and application are to be called: Use of Nano corpuscles and other innovative filling materials, Applicating nanostructures and layers. This contribution attempts to register the essential Nano-scaled innovations either how they are already to be observed today or announce to them-selves. Here, we are going to coat the Nano particles in the conventional tools and then we turn a hard material which is hard to turn. Before we are getting deeper to this project, we first see about the Nano technology, materials what we are used, where we carried out, what type of tools are going to be used.

Full Text:



K. Jemielniak. Rough turning of Inconel 718”, Adv Manuf Sci Technol. 2009; 33.

T.M. Cullen, J.W. Freeman. The Mechanical Properties of Inconel 718 sheet Alloy. 1965.

D.G. Ahn, K.W. Byun, M.C. Kang. Thermal characteristics in the cutting of inconel 718 super alloy using Nd: YAG laser, J Mater Sci Technol. 2009.

F.J. Teeter. Surface Engineering Coating Association. 2006.

C.H.R. Vikram Kumar, P. Keasvan Nair, B. Ramamoorthy. Characterization of multilayer pvd nanocoatings deposited on tungsten carbide tools. 2007.

I.M. Akhtar-uz Zaman. Development of nanocaotings on cutting tools. 1997.

S. Plano. Development of Innovative Nanocomposite Coating for Magnesium Component Protection. 2002.

H. Hofmann, Ch. Bonjour, R. Mulone, S. Blanc, M. Dvorak. Development of novel polymer- nanocomposite coatings produced by HT- HVOF spraying. 1950.

J. Mendel. Dispersions and Coatings. 2009.

T. Cselle1, O. Coddet, C. Galamand, P. Holubar, M. Jilek, J. Jilek, A. Luemkemann, M. Morstein. New Generation of PVD-Coatings for Cutting Tools. 2008.

S.K. Kim. Nano Technology in Marine Coatings (Paints). 2008.

J. Huang, I. Ichinose, T. Kunitake. Nanocoating of natural cellulose fibers with conjugated polymer: hierarchical polypyrrole composite materials. 2005.

J. Pimenoff, Beneq. Nanocoatings for energy conservation and generation. 2009.

M. Píška, A. Polzer. New Hard Nano-Crystalline Coatings for Cutting Tools and Their Testing. 2008.

A. Mathiazhagan, R. Joseph. Nanotechnology – A New Prospective in Organic Coating–Review. 2011.

J. Rowan. Overview of nanocoating Technology. 2003.

H. Bruus. Introduction to nanotechnology.

E. Drexler, C. Peterson. With Gayle Pergamit, Nanotechnol Revol. 1991.

Y. Wang, Z. Pan, C. Wang, X. Sun, Z. Peng, B. Wang. Cutting Performance of WC-Co Alloys Modified by Nano-Coating. 2012.

O. Seo, S. Kang, E.J. Lavernia. Growth Inhibition of Nano WC particles in WC-Co Alloys during Liquid-Phase Sintering. 2003.

Z. Yao, J.J. Stiglich, T.S. Sudarshan. Nano-grained Tungsten Carbide-Cobalt. 2007.

Y.C. Chen, Y.S. Liao. Study on wear mechanisms in drilling of Inconel 718 superalloy. 2003.

G. Liu, X. Li, B. Qin, D. Xing, Y. Guo, R. Fan. Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. 2004.

J. He, J.M. Schoenung. Nanostructured coatings. 2002.

Y. Wang, Z. Pan, C. Wang, X. Sun, Z. Peng, B. Wang. Cutting Performance of WC-Co Alloys Modified by Nano Particles. 2012.

R.P. Singh. Synthesis and Charecterization of tungsten carbide nanoparticles. 2008.

S. Kalluri, K. Bhanu Sankara Rao, G.R. Halford, M.A. McGaw. Deformation and Damage Mechanisms in Inconel 718 Superalloy. 1994.

J. Michael Pereira, B.A. Lerch. Effects of Heat Treatment on the Ballistic Impact Properties of Inconel 718 for Jet Engine Fan Containment Applications. 2001.

L.A. Jackman, G.J. Smith, A.W. Dix, M.L. Lasonde. Rotary Forge Processing of Direct Aged Inconel 718 for aircraft engine shafts. 1991.


  • There are currently no refbacks.